EOTech EXPS3 Series
If an item is showing out of stock and you want to put one on order with no up front costs, please give us a call at (702) 324-6463.
The EXPS3 is smaller and lighter than all other holographic weapon sights but just as fast. Law enforcement officers and hunters appreciate the light weight and compact size for carrying convenience on the job and in the woods. The EXPS3 runs on a single 123 battery. The single-lithium-battery configuration allows more rail space, leaving more room for rear-iron sights, magnifiers, or a night vision mount.
The
“E” is for “Extreme.” The EXPS3 offers true 2-eyes-open shooting and a 7
mm raised base that still allows for iron sight access. It features
easy-to-adjust side buttons and an adjustable, locking, quick-detach
lever for easy attachment and removal.
EXPS3 was chosen by the U.S. Special Operations Command (US SOCOM) as their primary optic for close-quarter engagements.
It
is also the optic of choice for the technologically advanced modern
rifle hunter. Its night vision-compatibility makes it a versatile choice
for day or night hunting.
| Ordering Information | |
|
EXPS3-0 EXPS3-0TAN |
UPC:
672294600336 UPC: 672294600343 |
| EXPS3-2 EXPS3-2TAN |
UPC: 672294600350 UPC: 672294600398 |
| EXPS3-4 | UPC: 672294600367 |
| Operation | |
| Optics | Transmission Holography - 100% Parallax Free |
| Magnification | 1X |
| Eye Relief | Unlimited |
| Sealing | Fog proof Internal Optics |
| Waterproof | Submersible to 33' |
| Adjustment (per click) | 0.5 MOA (1/2" at 100 yards) |
| Adjustment Range | +/- 40 MOA Travel |
| Mount (Adjustable for Width) | 1" Weaver or MIL-STD-1913 "Picatinny" Rail |
| Return to Zero | Repeatable to 2 MOA after Re-Mounting |
| Heads-Up Display Window | |
| Optical Surfaces | Anti-Glare Coating |
| Window Dimensions | 1.2" x 0.85" (30mm x 23mm) |
| Front Window Material | 1/8" Solid Glass |
| Rear Window Material | Shatter Resistant Laminate 3/16" Thick |
| Field-of-View (100yds) | 30yds (28m) at a 4" Eye Relief |
| Standard Reticle |
EXPS3-0: 65 MOA Ring and 1 MOA Dot EXPS3-0TAN: 65 MOA Ring and 1 MOA Dot |
| Standard Reticle |
EXPS3-2: 65 MOA Ring and (2) 1 MOA Dots EXPS3-2TAN: 65 MOA Ring and (2) 1 MOA Dots |
| Standard Reticle | EXPS3-4: 65 MOA Ring & (4) 1 MOA Ranging Dots for .223 |
| Electrical | |
| Brightness Adj. Range | 146,000:1 brightest to lowest |
| NV Brightness Range: | 1280:1 with NV Switch Engaged |
| Function Button Location | Side |
| Power Source | (1) 123 Lithium Battery |
| Battery Life | 600 continuous hours at nominal setting 12 |
| Brightness Settings | 30 Settings with Scrolling Feature (10 for NV use) |
| Auto Battery Check Indicator | Flashing reticle upon start-up |
| Auto Shut-down | At 8 hrs- programmable to 4 hrs |
| DIMENSIONS | |
|
Length Width Height |
3.5" (91.4 mm) 2.4" (60.9 mm) 2.8" (71 mm) |
| Weight | 11.2 oz (317 grams) |
| ENVIRONMENTAL DATA | |
| Temperature Range | -40ºF to 150ºF |
| Max Storage Temp. | -80ºC (176ºF) |
These
EOTech sights are proudly manufactured in the USA
*
EXPS3-2 Reticle is a 65MOA circle with (2) 1 MOA Aiming Dots
* Single transverse
123 battery to reduce sight length
* Shortened base only requires at most 2 3/4 inch of rail space
* Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved
* Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle
* Average battery life at brightness level 12 is roughly 500-600 hours
* Side buttons with an adjustable, locking, quick detach lever for easy attachment and removal
* The EXPS3 models are Night Vision compatible, for NON-Night Vision sights see the EXPS2 sights.
HWS Features
Electronic
Features...The HWS
uses state-of-the-art digital electronics design. Twenty
brightness levels (plus 10 additional NV settings) ensure proper brightness control in either low
light or very bright sunlight. An on-board microprocessor provides
automatic battery check indicator, up/down brightness scrolling
and programmable auto shutdown features. All electronics are fully
encapsulated in shock absorbing resin compound.
The HOLOgraphic Advantage...The holographic patterns have been designed to be instantly visible in any light, instinctive to center regardless of shooting angle, and to remain in view while sweeping the engagement zone. Reticles are designed as large, see-through patterns to achieve lightning quick reticle to target acquisition without covering or obscuring the point of aim.
Heads Up,
Full View...The HWS
employs a true Heads-Up Display that eliminates blind spots,
constricted vision, or the tunnel vision associated with tube
sights. All user controls are flush to the HWS's streamline
housing with no protruding knobs, battery compartments or mounting
rings blocking vision at the target area. True, 2 eyes open
shooting is realized. Instant threat identification is achieved by
maximizing the operator's peripheral vision and ultimately gaining
greater control of the engagement zone.
The
Magic of Holography
In holography, all the information required to reconstruct the reticle image is recorded everywhere in the Heads-Up display window. If the window is obstructed by mud, snow, rain, etc., the HWS remains fully operational , with point of aim/impact being maintained. Even in such extreme cases where the laminated window is shattered, the HWS is fully functional! As long as the operator can see through any portion of the window, the entire reticle pattern is visible on target...the operator can still engage with confidence.
HWS Benefits
Extreme
Durability
The HWS has been designed and tested to provide consistent, reliable performance even in the most hostile operational environments. It is waterproof, fog proof, shockproof, and temperature proof.
The HWS is designed to withstand Mil-Spec drop tests and still remain fully operational and hold zero. The HWS has been extensively tested in a punishing recoil simulator generating 3,500 G's of acceleration in less than 0.5 milliseconds (the recoil of a .454 Casull revolver) as well as various environmental chambers).
The Heads Up Display is constructed with a 3 layer, shatterproof laminate glass that is 3/16" thick for added durability. Additional protection of the Heads Up Display is provided with a "roll bar" ruggedized hood.
No Revealing Signature
The HWS does not emit any muzzle side position revealing light signature...the projected reticle pattern is visible only to the operator. Even Gen III night vision equipment cannot detect muzzle side signature of the operator's position.
All optical surfaces are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area.