AN/PVS-7 Night Vision Goggle
MUST CALL TO ORDER
AN/PVS-7 MILSPEC Single Tube Night Vision Goggle
Call around and then call (702) 324-6463 or email sales@nitevis.com with your best price
Central Contractor, SAM & ORCA Registered as a Veteran Owned Small Business. Dealers/Resellers Welcome/CAGE Code: 36BD2
PVS-7 Kits Include: (1) Headmount Assembly, MILSPEC 27mm Objective Lens, (2) Rubber Eyecups, (2) AA Batteries, (1) Operator's Manual, (1) Soft Carrying Case, (1) Daylight Lens Cover, Integrated IR LED, (1) Lens Cleaning Tissue Kit, (2) Demist Shields, (1) Sacrificial Filter, (1) Shoulder Strap
The AN/PVS-7 is engineered to meet MIL-SPEC requirements and standards. The rugged and reliable design ideally accommodates users for extended wear and superior surveillance functions. This NV goggle has an integrated IR illuminator with an IR “on” indicator, low battery indicator, excess light exposure cut-off sensor and other features. The model is based on the most advanced image intensifiers, with 64-72 lp/mm and a Figure of Merit of no less than 1600.
Using a MILSPEC PVS-7 housing and incorporates the new GEN III image intensifier tube. With the use of a single image tube (Multiple Grades & Generations to choose from) and a dual eye configuration, the AN/PVS-7 provides outstanding Night Vision performance without the high cost of the Dual tube configuration.
It features simple user controls and fully automated image tube protection. This system allows the user to have complete freedom of movement while maintaining equilibrium and balance in a hands free application. The AN/PVS-7 also incorporates an infrared illuminator with a momentary and continuous on switching function. Infrared operation and low battery indicators are displayed within the user‘s field of view.
Interpupillary adjustment (distance between eyes) can be made as well as an Objective Lens Focus. With the separate Diopter adjustment rings (left/right eye focus) users get unparalleled comfort and optimum vision. Intricate tasks "close work" such as reading and repair are facilitated using the infrared LED on the body of the goggle.
Optional accessories include a 3X or 5X Afocal Magnifier lens to facilitate field conversion for long-range observation & surveillance. Slip-On Infrared Spot/Flood Lens adapter that can be adjusted to illuminate your desired area, Infrared lights that covertly illuminates large areas for the Night Vision, just as regular Spotlights do for visible enhancement. Flashing Beacons create an infrared/visible signal to mark shorelines for Boaters or campsites for Hikers & Hunters. For Security Details, the Beacons can be carried in a pocket to keep your client covertly marked, even in large crowds at night. The slip-on Magnetic Compass provides directional information in the field of view.
These are the choice for many Law Enforcement Agencies, Homeland Security Teams, Fire Departments and Private Security Firms because of their battle proven effectiveness with our own US Military.
The AN/PVS-7 is engineered to meet MIL-SPEC requirements and standards. The rugged and reliable design ideally accommodates users for extended wear and superior surveillance functions. This NV goggle has an integrated IR illuminator with an IR “on” indicator, low battery indicator, excess light exposure cut-off sensor and other features. The model is based on the most advanced image intensifiers, with 64-72 lp/mm and a Figure of Merit of no less than 1600.
Other tube configurations are available. Please call if you have a specific tube requirement.
* Optional 3X or 5X Magnifier lenses available.
* Lightweight & Waterproof
* Rugged Design & Easy to Operate
* Automatic Brightness Control
* Head or Helmet Mountable for
"Hands-Free" Operation
* Interpupillary Adjustments between 55 - 71mm
* Automatic Highlight (Bright Source) Protection
* Integrated IR illuminator
* Multiple helmet mount options.
These NVG's are 100% built in the USA and have ergonomically designed interface controls that comprise of interpupillary and vertical/fore-aft/tilt adjustments for improved situational awareness and enhanced ergonomics.
This "Top-of-the-Line"
Full MILSPEC AN/PVS-7 Goggle
Kit from KERIF Night Vision uses only the highest quality L-3 or ITT Image
Tubes, Optical Lenses, Housing Components and Electronics on the market today.
Electro-Optical tools designed specifically to meet the diverse demands of our
rugged Military and Law Enforcement Professionals. Like buying a car, you have
many features like engine, transmission, and suspension that can make it a
stock model or a high performance machine. With little differences on the
outside to discern between the good, bad & the ugly, you have to read &
understand the build sheet or take the salesman's word for it. We give you the
Factory Data Sheet and in some instances, let you take a test drive.
Differences like the clarity of the optical lenses versus just glass; whether the components used in the power supply & electronics package are made in the US or overseas or if they are new or used; whether you want the housing made in the USA that meets MILSPEC standards with rubber seals that keep the water out without worry, or something made in China that you wouldn't want to splash with water; you want to be sure that when using your Helmet Mount, the housing has brass screws (not plastic or other cheap metal) to automatically turn the unit On/Off, saving your batteries and reducing the step of turning it back on in an emergency.
Larger differences like the tubes
(engines) can be selected to meet your needs, and with our access to virtually
every system available, we will do our best to meet or exceed your
expectations, without breaking your budget. Just like cars, even if you have a
big block with ungodly horsepower, you’ll need to have other components
designed to match it's performance potential. You wouldn't put an Indy Car Race
Engine in a Yugo, yet some manufacturers do just that to gain the competitive
pricing edge and you are stuck wondering why you didn't call us.
Let's talk about some of the uses of the AN/PVS-7 Goggle. The most common use is as a
hand-held goggle and is used for area surveillance.
TIP: Tests have shown that it can take up to 30 minutes for your eyes to assimilate to the darkness once exposed to light, and the bright green image produced will affect your vision. Features of the PVS-7 style Goggle include Automatic Brightness Control and Bright Source Protection function to automatically adjust the image for you to see it properly.
Because both eyes are stimulated with a bright green image that can't be adjusted beyond what the Automatic Brightness Control and Bright Source protection offers, when the goggles are removed or if the batteries drain, you may have difficulty seeing anything for several minutes. If you anticipate driving, walking, or engaging in CQB operations, we recommend looking at the PVS-14 Monoculars or a Dual-Tube System. Aviation Goggles offer a Dual-Tube Configuration and are tested & certified by the FAA every 180 days to ensure proper operation.
For prolonged use, a Headmount can be priceless and we include one with your purchase. By using the chin straps and head straps, each unit allows for vertical & fore-and-aft adjustments for either left or right eye. For clear images, the objective lens and eyepiece (Diopter) focus for various levels of vision enhancement.
Automatic Brightness Control and Bright Source Protection are standard.
The
PVS-7 is also equipped with a built-in infrared light-emitting source to help
in low light situations. Don't overlook the importance of having additional Infrared Lights to enhance the visibility of longer ranged targets, covertly light
up dark overhangs and blind corners, and even mark positions, vehicles,
personnel and other points of interest by using field programmable beacons.
Lights that are weapons Mountable, like the Steiner Battle Light, SureFire X400 and others can be
outfitted with IR Filters and pressure switches.
The AN/PVS-7D
has State-of-the-Art performance with a quick-release fastener for one-hand
mounting and dismounting, Automatic Brightness Control, a built-in IR
illuminator with ON-indicator, EMI-RFI Protection and a low-battery indicator.
With simple user controls and fully automated image tube protection, this system allows the user to have complete freedom of movement while maintaining equilibrium and balance in a hands free application. The PVS-7 also incorporates an infrared illuminator with a momentary and continuous on switching function. Infrared operation and low battery indicators are displayed within the user’s field of view.
Interpupillary adjustment (distance between eyes) can be made as well as an Objective Lens Focus. With the separate Diopter adjustment rings (left/right eye focus) users get unparalleled comfort and optimum vision. Intricate tasks "close work" such as reading and repair are facilitated using the Built-in IR illuminator.
For complete darkness situations the Slip-on IR Spot/Flood greatly enhances the image and brightens the room. Optional Infrared Spot Lights covertly illuminate larger areas, just as regular Spotlights do for visible enhancement.
A detector located on the goggle's body called the High-Light Cutoff will automatically shut off after 70 (+/- 30) seconds of operation in daylight or bright room light to protect the image intensifier tube. Headlights, flashlights or other concentrated light sources will not actuate the High-Light Cutoff unless focused directly on the detector.
Included accessories include an Infrared Flashing Beacon designed to create an (IR) Infrared signal for marking points of interest, personnel, vehicles, shorelines for Boaters or campsites for Hikers & Hunters. For Security Details, the Beacons can be carried in a pocket to keep your client covertly marked, even in large crowds at night.
The slip-on Magnetic Compass provides directional information in the field of view.
This system is designed to operate with infrared aiming LASER's and illuminating devices.
Tube Specifications |
MIL GRADE P+ |
Commercial P |
Commercial P- |
Signal to Noise Ratio: |
20:0 min. |
18:0 min. |
16:2 min. |
Photocathode Response: |
1750 min. |
1500 min. |
1350 min. |
Halo: |
n/a ** |
n/a ** |
n/a ** |
Electronic Background Input: (EBI) |
2.5 max. |
2.5 max. |
2.5 max. |
Resolution: |
64 lp/mm min. |
57 lp/mm min. |
57 lp/mm min. |
Max Spots Allowed |
ZONE |
ZONE |
ZONE |
...............>.012-.015 |
0___0___0 |
0___0___0 |
0___0___0 |
...............>.009-.012 |
0___0___1 |
0___0___1 |
0___0___1 |
...............>.006-.009 |
0___2___2 |
0___2___2 |
0___2___2 |
...............>.003-.006 |
0___2___3 |
0___2___3 |
0___2___3 |
Tube Specifications |
MIL SPEC-ULT |
MIL SPEC-VG |
MIL SPEC-YG |
|
|||
Signal to Noise Ratio: |
28:0 min. |
25:0 min. |
25:0 min. |
|
|||
Photocathode Response: |
2200 min. |
2200 min. |
1800 min. |
|
|||
Halo: |
n/a ** |
n/a ** |
n/a ** |
|
|||
Electronic Background Input: |
2.5 max. |
2.5 max. |
2.5 max. |
|
|||
Resolution: |
64 lp/mm min. |
64 lp/mm min. |
64 lp/mm min. |
|
|||
Max Spots Allowed Spot Size (in.) |
ZONE |
ZONE |
ZONE |
|
|||
...............>.012-.015 |
0___0___0 |
0___0___0 |
0___0___0 |
|
|||
...............>.009-.012 |
0___0___0 |
0___0___0 |
0___0___0 |
|
|||
...............>.006-.009 |
0___0___1 |
0___0___1 |
0___1___1 |
|
|||
...............>.003-.006 |
0___0___2 |
0___0___2 |
0___2___2 |
|
|||
|
|
PVS-7 Accessories |
NSN |
||||
|
A-A-50177 |
Lens Cleaning Tissue, Pack |
6640-00-240-5851 |
||||
|
A3144263-1 |
Demist Shield, PVS-7B/D, (2) Required |
5855-01-246-8272 |
||||
|
5009737 |
Killflash, Light Interference Filter (5855-01-328-5134) (DOD ONLY) |
5855-01-379-1410 |
||||
|
A3144264 |
Sacrificial Filter |
5855-01-240-8271 |
||||
|
1728010-2 |
Facemask Assembly |
|
||||
|
275121-2 |
Facemask Assembly |
5855-01-515-2102 |
||||
|
A3144268 |
Headmount Assembly |
5855-01-246-8266 |
||||
|
A3144436 |
Brow Pad, Assembly, Thick (Large) |
5855-01-297-7847 |
||||
|
A3144435 |
Brow Pad, Assembly, Medium |
5855-01-355-8600 |
||||
|
A3144280 |
Brow Pad, Assembly, Thin (Small) |
5855-01-355-8599 |
||||
|
A3144318 |
Objective Cap, Daylight Lens Cover (5855-01-373-6660) |
5340-01-397-6608 |
||||
|
A3144422 |
Rubber Eyecup, 2 Required |
5855-01-246-8273 |
||||
|
A3256345 |
Shuttered Eyeguard, Rubber, Compress Star Opening, 2 Required |
6650-01-444-1229 |
||||
|
A3144394 |
Battery Cap Assembly, PVS-7 |
5855-01-246-8265 |
||||
|
A3187430 |
Magnetic Compass, Slip-On |
5855-01-381-6052 |
||||
|
A3187392 |
Soft Carry Case |
5855-01-398-4284 |
||||
|
A3144262 |
Soft Carry Case, OD Green (OLD) |
5855-01-246-8269 |
||||
|
A3144267 |
Shoulder Strap |
5855-01-250-2431 |
||||
|
A3144306 |
Neck Cord |
4020-01-023-6271 |
||||
|
A3187441 |
IR Spot/Flood Lens, Slip-On, Adjustable |
5855-01-382-5169 |
||||
|
A3256368-1 |
PASGT Helmet Mount, w/chin strap, strapped or bolted |
5855-01-457-2953 |
||||
|
A3256368-2 |
MICH Helmet Mount, w/chin strap, strapped or bolted |
5855-01-441-0401 |
||||
|
A3264350 |
Hard Shipping/Storage Case, HC-7 Padded Ammo Can, OD Green |
5855-01-246-6805 |
||||
|
TM115855262102 |
Operator's/Training Manual AN/PVS-7B/D |
|
||||
|
HC-161006 |
Hard Shipping/Storage Case w/Molded Insert (16x10x6) |
|
||||
|
IFF-980S |
1" IFF-980 squares, 3/Pack |
|
||||
|
902111IR |
Phoenix Jr. (880nm-IR), 48ppm (Firefly) |
5855-01-438-4588 |
||||
|
902124IR |
Phoenix Jr 123, Infrared Beacon 880nm, Belt Clip |
|
||||
|
NVAC-107 |
Commercial Afocal, 3X Lens, (f/1.5) 13 deg FOV |
|
||||
|
A3256391 |
MILSPEC Afocal, 3X Lens, (f/1.5) 13 deg FOV (5855-01-461-2741) |
5855-01-423-0817 |
||||
|
NVAC-110 |
Commercial Afocal, 5X Lens, (f/2.4) 7.7 deg FOV |
|
||||
|
275095 |
MILSPEC Afocal, 5X Lens,
(f/2.4) 7.7 deg FOV (550-1503-001) |
5855-01-511-8594 |
||||
|
TS-4348/UV |
Test Set 4348 |
|
||||
|
268549 |
Purge Kit |
5855-01-442-8781 |
||||
|
KNV-NVAC-124 |
NV Purge Kit, Hard Case, 20 cu.ft. Nitrogen Tank (empty), Regulator, Purge Box, Hand Pump, Purge Adapter, Hoses, OPMAN, PVS-7, PVS-14, GT-14, G15, BNVD, BTS, MTS |
|
||||
|
ANV-126A |
Hoffman Test Set |
|
||||
Part Number |
NSN |
Description |
A3144394 (300033-G1) |
5855-01-246-8265 |
Battery Cap Assembly |
A3144422 (300194-1) |
5855-01-246-8273 |
Eyecup |
A3144318 (300206-1) |
5340-01-397-6608 |
Lens Cap, Objective |
A3144305 (300001-G2) |
5855-01-246-6807 |
Objective Lens Assembly |
A3207330 (300029-G1) |
5855-01-381-6048 |
Wired Body Assembly |
contact us |
n/a |
Image Tube |
A3144310 (300111-G1) |
5855-01-246-6810 |
Rear Cover Assembly |
A3144306 (300049-2) |
4020-01-446-8097 |
Neck Cord |
A3172531 (300056-G1) |
5855-01-246-6808 |
Collimator |
A3144404-2 (300168-G1) |
5930-01-246-8264 |
ON/OFF Knob Assembly |
A3144268 (300070-G2) |
5855-01-246-8266 |
Headmount Assembly |
11-5855-262-10-2 |
n/a |
Operator's Manual |
205689-067 |
n/a |
Litton Operator's Manual |
11-5855-262-23 |
n/a |
Maintenance Manual |
5009737 |
5855-01-379-1410 |
Light Interference Filter (LIF) |
A3187441 |
5855-01-382-5169 |
IR Spot/Flood Lens |
A3256368-1 |
5855-01-457-2953 |
PASGT Helmet Mount |
A3187430 |
5855-01-381-6052 |
Compass, Magnetic |
A3144257 (300114-G2) |
5855-01-246-6805 |
Hard Case |
A3297307 |
5340-01-509-1467 |
ACH/CVC Kit, Front Bracket |
A3144263 (300221-G1) |
5855-01-246-8272 |
Demist Shields (2) |
A3144267 |
5340-01-250-2431 |
Carry Strap |
274049-1 |
4310-01-096-1353 |
Camera Adapter |
A3144264 (300060-G1) |
5855-01-246-8271 |
Sacrificial Window |
275121-2 |
5855-01-515-2102 |
Facemask Assembly |
274424 |
n/a |
MICH/ACH Clip for Helmet Mount |
A3260933 |
5340-01-451-7737 |
Retaining Cord |
A3144292 |
5340-01-306-9354 |
Strap, Elevation |
A3144290 |
5855-01-297-7846 |
Neckpad |
A3144293 |
5340-01-469-1710 |
Strap, Side |
A3144436 |
5855-01-297-7847 |
Browpad, Thick |
A3144435 |
5855-01-355-8600 |
Browpad, Medium |
A3144280 |
5855-01-355-8599 |
Browpad, Thin |
A3144286 |
5855-01-283-2870 |
Strap, Chin |
A3187392 |
5855-01-398-4284 |
Carrying Case, Unmarked |
A3264350 |
8145-01-515-0612 |
Shipping Case, Unmarked |
TM-F5001-1 |
n/a |
Operator's Manual (Non-U.S. Military) |
MS51957-4B |
5305-00-224-0783 |
Screw, Pan-Head |
MS15795-802B |
5310-00-433-3599 |
Washer |
MS28775-044 |
5330-01-098-1232 |
Quad Ring |
A3144315 |
5305-01-266-9341 |
Screw, Purge |
A3144316 |
5331-01-356-7219 |
O-Ring, Purge |
A3144314 |
5310-00-043-4708 |
Washer |
A3260939 |
5935-01-448-6355 |
Battery Cap Retainer Kit |
MS28775-027 |
5330-00-729-4992 |
O-Ring, Battery Cap |
MS28775-032 |
5330-01-049-7374 |
O-Ring, Objective |
A3187446 |
5855-01-444-5248 |
Adapter |
266699 |
6640-01-496-2324 |
Lens Paper |
272003 |
n/a |
GOI Ground Helmet Mount |
272427-2 |
n/a |
ACVC Helmet Mount |
275131-1 |
n/a |
RBR Helmet Mount |
A3256368-2 |
5855-01-551-4525 |
MICH Helmet Mount |